Painting Advice and Premium Products from Experienced Professionals.
 |
Product Description
DEFY Deck Stain for Hardwoods is a synthetic, semi-transparent finish specifically formulated for use on cedar, mahogany, redwood, and other dense or difficult to penetrate woods.DEFY Deck Stain for Hardwoods also works well on composite woods. It is a VOC-compliant stain that penetrates wood pores to block out water and provide long-lasting protection from weather damage. The product's excellent penetration helps eliminate surface buildup and peeling.
USES:
DEFY Deck Stain for Hardwoods can be used on interior or exterior smooth hardwood surfaces including: wood siding, decks, outdoor wood furniture, and other hardwood surfaces.
For more porous surfaces such as pressure treated, pine and cedar log siding, or rough sawn lumber, use DEFY Epoxy Fortified Wood Stain. DEFY Deck Stain for Hardwoods is available in Cedar Tone, Light Walnut and Natural Pine.
Technical Information
To apply as directed (2 coats), you will need approximately 1 gallon for every 100 square feet of surface.
Technical Data Sheet and Application Instruction.
Material Safety Data Sheet
Test Results:
ASTM D5401: Percent water absorption
on wood treated with DEFY<1%.
ASTM G53: Accelerated weathering (QUV) 2,500 hours. Excellent color retention; no loss in water repellency.
Outdoor Exposure: Indiana and Florida test fences. Excellent color retention, no loss in water repellency.
Step 1.
Cleaning Wood ..or.. Stripping wood
Step 2.
Brightening Wood
Step 3.
Applying Stain
For product inquiries,
or to order by phone,
please call us at:
PaintSource.net
Lexington, KY
1-866-278-9831
- BENEFITS
● Specially formulated for smooth cedar and other dense or "oil-rich" woods
● Excellent on composite woods
● Resists flaking and peeling
● Soap and water clean-up
● Easy to maintain
HORIZONTAL SURFACES: Apply two wet on wet coats, waiting up to 20 minutes between coats. It is very important to not let the first coat dry completely before applying the second coat. Brush product into surface
working out all drips, puddles, or areas of overspray before product dries. Do not over apply stain. To avoid the possibility of peeling, apply only as much stain as the wood can easily absorb. A sure indication of over application is a shiny finish. Complete entire sections or to a natural break before allowing to dry. Never break in the middle of a board as it will cause unsightly color variations.
Thoroughly coat the ends of boards to prevent water penetration.
